Honeywell RK-MCU - Page 15

13
Parameters
Values
Output signal
1V (0dBV)
THD
<0.1%
Internal Power
Amplifier
Max. power output
500W
Output signal
70V(CH1A)
Frequency response
80Hz-18KHz, ±3dB
THD
<0.1%
Power Amplifier
Interface
Number
3 (CH1, CH2 and spare amplifier)
Output signal
1.4V
THD
<0.1%
Control signal
Self-testing, amplifier fault and power saving
control signal
Loudspeaker Interface
Zone Number
8 (each has A and B output)
Max. load power
500W
Contact Input / Output
Contact input
10 contact input interfaces with supervision
Contact output
8 contact output interfaces (NO、NC and
COM), “Fault” output and “Alarm” output.
Maximum voltage of the
outputs
AC 250V/DC 30V
Maximum current of the
outputs
2.5A