Honeywell RP2D User Manual

22 RP2/RP4 User Guide
3. Click on WPA/WPA2.
4. Change (or confirm) the following parameter settings:
• Group Cipher: TKIP
• Network Authentication Type: WPA-PSK_TKIP
5. Type the pass phrase under WPA_PSK_TKIP/WPA2_PSK settings.
6. After updating the New Value column, click the Send button to send this
change to the printer.
7. Allow 30 seconds for the printer to reset.

Honeywell RP2D Specifications

General

Brand	Honeywell
Model	RP2D
Category	Printer
Language	English