RP2/RP4 User Guide 43
Weight (printer and battery only) 1.73 lbs. (0.78kg)
User Interface
Buttons 2
Electrical
DC Input
Smart Battery External DC Jack and
External Charge Contacts 9.5-14V, built-in spike and surge protection
Battery
Lithium Ion 8.4V
5200 mAHr minimum
Endurance Prints more than 960 4”x6” (102 x 152 mm) labels
when operating 8 continuous hours
Expected Charge Time 4-6 hours
Communication
USB Interface 2.0 (full speed)
Bluetooth Interface Versions 4.0 LE, Class 2, Serial-port profile
iOS certified
Wireless LAN
Network Standard IEEE 802.11 a/b/g/n with Dual Radio
Wireless Access Modes Infrastructure and ad-hoc
Security Protocols WEP (64/128), WPA (TKIP/RC4), WPA2 (CCMP/
AES)
Authentication LEAP, EAP-PEAP, EAP-FAST, EAP-TTLS, EAP-LEAP
Network Support DHCP, TCP, UDP, DNS, BOOTP
Print Technology
Print Head Direct thermal, 203 DPI
Print Width 4.1 in. (104.8mm)
Print Speed Up to 5 in. (127mm) per second in draft mode
Memory
Installed Memory 64 MB RAM/2 GB Flash
Media
Media Roll Width 2 - 4.4 in. (51 - 111mm)
Maximum Print Width 4.1 in. (104mm)
Maximum Roll Capacity 2.25 in. (58mm) outside diameter
Core Sizes 0.4 in. (10.16mm), 0.75 in. (19mm), or 1 in.
(25.4mm) inside diameter
Media Thickness 2 - 6.3 mil (.05 - .16mm)
RP4
Parameter (Continued) Specification
To Next Page
Loading...
Need help?
General
