EasyManuals Logo

Honeywell RPLS730B User Manual

Honeywell RPLS730B
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
4 5
Compatibility
Compatible with most heating, cooling, and heat pump systems
Required: 24 VAC power (“C” wire)
Does not work with electric baseboard heat (120240V)
Does not work with millivolt systems
Does not support Universal Input (S terminals) for indoor and outdoor sensors
Does not support Universal Relay (U terminals) for ventilation
Android or iOS smartphone, tablet, or device
For help, contact:
WEB yourhome.honeywell.com/support
EMAIL MyLyric@honeywell.com
PHONE 18006333991
SOCIAL Twitter: @Honeywell_Home, Facebook: Honeywell Home
CAUTION: MERCURY NOTICE
If this product is replacing a control that contains mercury in a sealed tube, do not place the old
control in the trash. Contact your local waste management authority for instructions regarding
recycling and proper disposal.
CAUTION: EQUIPMENT DAMAGE HAZARD
Compressor protection is bypassed during testing. To prevent equipment damage, avoid cycling the
compressor quickly.
CAUTION: ELECTRICAL HAZARD
Can cause electrical shock or equipment damage. Disconnect power before beginning installation.
REQUIRED: 24 VAC POWER (“C” WIRE)

Other manuals for Honeywell RPLS730B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell RPLS730B and is the answer not in the manual?

Honeywell RPLS730B Specifications

General IconGeneral
TypeProgrammable Switch
Voltage120 VAC
Programming7-day programmable
Battery BackupYes
ColorWhite
Number of Buttons1
Mounting TypeWall Mount
MaterialPlastic
Load TypeIncandescent, Halogen
Weight4.8 ounces

Related product manuals