Honeywell RTH2300 series User Manual

Operating Manual
69-2605ES—02 8
Select the fan setting
Set the FAN switch to Auto or On.
In “Auto” mode (the most commonly used
setting), the fan runs only when the heat-
ing or cooling system is on.
Ifsetto“On,”thefanrunscontinuously.
Set FAN switch to choose whether the fan
runs continuously or only as needed.
M32700
Heat Off Cool Auto On
Fan
69-2605ES_A.indd 8 5/25/2011 11:51:48 AM

Honeywell RTH2300 series Specifications

General

Type	Programmable Thermostat
Display	LCD
Power Source	Battery
Temperature Range	40°F to 90°F (4°C to 32°C)
Stages	1 Heat/1 Cool
Backlight	No
Compatibility	Single Stage Heating and Cooling Systems
Voltage	24 VAC
Battery	2 AA batteries