Honeywell RTH2300 series - Program schedule override (permanent)

Operating Manual
69-2605ES—02 14
About your new thermostat
Hold
Set
am
70
6
:
30
M32710
Set
am
75
6
:
30
M32709
Program schedule override (permanent)
Note: Make sure the thermostat is set to the
system you want to control (heat or cool).
Press to permanently adjust temperature.
Press HOLD to permanently adjust
the temperature. This will override the
temperature settings for all time periods.
The “Hold” feature turns off the program
schedule and allows you to adjust the
thermostat manually, as needed.
Whatever temperature you set will be
maintained 24 hours a day, until you
manually change it, or press RUN to
cancel “Hold” and resume the program
schedule.
Press to cancel “Hold” setting and resume
program schedule.
69-2605ES_A.indd 14 5/25/2011 11:51:49 AM