1. Pull out the battery cover.
2. Install the batteries as shown. Observe the polarity.
3. Reinstall the battery cover. You will hear a clicking sound.
After the batteries are installed, the thermostat performs a series of tests for approximately 5 seconds.
Afterwards, the screen displays the actual temperature. It is normal that the displayed temperature be higher than the
ambient temperature if you are holding the thermostat. The thermostat will display the ambient temperature once it is
installed on the wall. By default, the setpoint is 70 °F (21 °C).
Install thermostat
1. Mount the thermostat on the wallplate.
To Next Page
Loading...
