DISPLAY DESCRIPTION
OPTIONS
1
Temperature display °C or °F
Time display 12 h or 24 h
Early Start
2
On or Off
Heating cycles per hour
3
2, 3, 4, 5 or 6
4
Cooling cycles per hour
3
2, 3, 4, 5 or 6
5
¹ Default settings are shown in bold and underlined.
² See page 3 of Operating Manual.
³ Use the system switch to switch between the two parameters.
4
For optimal heating control, use the setting that matches your system as follows: 2=30 min (steam, gravity), 3=20
min (hot water, 90%+ high-efficiency furnace), 4=15 min (gas or oil), 5=12 min (alternate setting for gas or oil), 6=10
min (electric).
5
The corresponding cooling cycle lengths are as follows: 2=30 min, 3=20 min, 4=15 min, 5=12 min, 6=10 min
69-2214ES—04 M.S. Rev. 03-11
Printed in U.S.A.
Customer Support
Do you need assistance?
We are here to help.
Call 1-800-468-1502.
File Downloads
To Next Page
Loading...
