Honeywell RTH2510 Series Quick Installation Guide

11 69-2602EF—01
If your system type is:
q Single Stage Heat and Cool
q Heat Only or Cool Only
Congratulations, you’re done!
If your system type is:
q Heat Pump* with Backup Heat
Continue with advanced installation
on next page to match your thermostat to your system
type.
*Heat Pump—an air conditioner that provides cooling in the
summer, and also runs in reverse in the winter to provide
heating.
If you are not sure of your system type or if you have
other questions, call us toll-free at 1-800-468-1502.
This thermostat works on 24 volt or 750 mV systems. It will
NOT work on multi-stage conventional systems or 120/240
Volt systems.
11
If your system type is...

Honeywell RTH2510 Series Specifications

General

Display Type	Digital
Programmable	Yes
Power Source	Battery
Battery Type	AA Alkaline
Number of Batteries	2
Temperature Control	Digital
Compatibility	Single Stage Heating and Cooling Systems
Stages	1 Heat/1 Cool
Voltage	24V
Temperature Range	40°F to 90°F (4°C to 32°C)
Programming Options	7-Day, 5-2 Day
Display	Backlit
Weight	0.5 lbs (227 g)