Honeywell RTH3100C - About Your New Thermostat; Thermostat Features Overview

4
Do not remove wallplate yet
3 Label Wires with Tags
Label the wires using the supplied wire labels as you disconnect them. If any
wires are not attached to terminals in your old thermostat, do not connect them
to your new thermostat.
Wrap the bare metal ends of each unused wire with electrical tape, so it cannot
touch and short out other wires.
Wire Labels
M28100
C
C
MCR33823
Terminal
designation
If you have an older thermostat with a
sealed mercury tube, turn to page 2
for proper disposal instructions.
Terminal designation
C
C
MCR31537
2 Remove Old Thermostat
Remove old thermostat but leave wallplate with wires attached.
4 Separate Wallplate from
New Thermostat
Remove wallplate from the new thermostat
and mount onto wall.
Wallplate