Honeywell RTH4300B

RTH4300B Programmable Thermostat
5
About your new thermostatSet the time and day
1. Press the SET button, then press s or t
to set the clock time.
2. Press the SET button, then press s or t
to select the day of the week.
3. Press RUN to save & exit.
Note: If the display flashes Set Clock, the
thermostat will follow your settings for the
weekday “Wake” time period until you reset
the time and day.
Press SET, then adjust time.
Press SET, then select current day.
Set
Clock
AM
6
:
30
Wed
Set Day