Honeywell RTH8580WF - Setting Filter Reminder Intervals

69-2715ES—01 44
Setting filter reminder intervals
MCR31559
SLEEP
FILTER
DAYS
CHANGE FILTER
Inside
RESET
MORE
If activated during installation, the filter reminder
alerts you with a message above the time when
it is time to replace your filter.
Press RESET after changing the filter, to restart
the timer.
To change the reminder interval:
1 Press MORE, then EDIT.
2 Press s or t to select the desired interval
(in days), then press DONE.
3 Press RESET.
4 Press DONE to save and exit.
Note: System setting function 0500 governs the
filter interval. See “Filter Change Reminder” on
page 57.