To Next PageTo Next Page
Need help?Do you have a question about the Honeywell RTH8500 Series and is the answer not in the manual?
General| Programmability | 7-day programmable |
|---|---|
| Wi-Fi | No |
| Operating Modes | Heat, Cool, Auto, Off |
| Fan Modes | Auto, On, Circulate |
| Hold Feature | Yes |
| Filter Change Alert | Yes |
| Stages | 2 heat / 2 cool |
| Temperature Range | 40°F to 90°F (4.5°C to 32°C) |
Overview of the thermostat's main display screen and its interactive elements.
Details default thermostat settings for reducing heating and cooling expenses.
Step-by-step guide to physically mounting and connecting the thermostat to the wall.
Instructions for linking the thermostat to your home's wireless internet connection.
Steps to create an account and register the thermostat for remote access.
How to set the current date and time on the thermostat display.
Instructions for configuring the fan operation mode (ON or AUTO).
How to choose between heating, cooling, auto, or off modes for the HVAC system.
Guide to setting daily temperature schedules for different time periods.
How to make temporary temperature adjustments without changing the main schedule.
How to hold a specific temperature indefinitely, overriding programmed schedules.
Suspending the program schedule for extended periods away from home.
Configuring alerts for replacing the furnace filter based on runtime.
Assigns a name to identify the thermostat when viewed remotely.
Sets the first two digits of the year for date settings.
Sets the last two digits of the year for date settings.
Sets the current month for date settings.
Sets the current day of the month for date settings.
Enables or disables the 7-day programmable schedule feature.
Restores programmed schedule to energy saving settings.
Configures the thermostat for specific heating and cooling system types.
Sets fan operation for gas/oil or electric heating systems.
Configures the valve for heat pumps based on O or B wire connection.
Sets cycle rate for gas/oil or electric furnaces.
Sets cycle rate for hot water or high-efficiency furnaces.
Controls the thermostat screen backlight behavior.
Sets manual or automatic switching between heating and cooling modes.
Selects the display format for temperature readings.
Enables or disables automatic adjustment for daylight saving time.
Sets reminders for replacing the furnace filter based on run time.
Allows thermostat to learn system response times for scheduled temps.
Selects between 12-hour or 24-hour clock display.
Disconnects from Wi-Fi and restores original thermostat settings.
Enables or disables the thermostat's Wi-Fi functionality.
Manages the thermostat's connection status to the Wi-Fi network.
Steps to resolve issues when the thermostat screen is not displaying anything.
Troubleshooting steps for when the system cannot be set to cooling mode.
Diagnosing why the fan is not operating during heating cycles.
Understanding the 'Wait' message related to compressor protection.
Resolving issues with heat pumps delivering incorrect air temperature.
Explanation for why the lower right button might be blank.
Interpreting the red light indicator, especially in Emergency Heat mode.
Steps to take when the heating or cooling system fails to activate.
Troubleshooting why the heating system operates during a cooling demand.
