Honeywell RTH8500 Series - Adjusting Program Schedules; Overriding Schedules Temporarily; Overriding Schedules Permanently

33-00133ES—01 16
MORE
SLEEP
SLEEP
MCR31555
Adjusting program schedules
1 Press SCHED, then EDIT. Screen displays day
buttons at top.
2 Press day buttons (MON–SUN) to select days.
3 Press s or t to set Wake time for selected
day(s).
4 Press s or t to set Heat and Cool
temperature for this time period.
5 Press another period (LEAVE, RETURN, SLEEP)
and set time and temperatures for each.
6 Press DONE to save and exit (or press CANCEL
to exit without saving changes).
Note: You can press CANCEL PERIOD to eliminate
any unwanted time period.
Overriding schedules temporarily
1 On the home screen, press s or t to
immediately adjust the temperature.
2 Adjust the time to when you want the hold to
end (the default is the end of the current period).
The new setting will be maintained until the time
shown under Hold Until. When the timer expires,
the schedule will resume, and the temperature
will return to the setting for the current time
period.
To cancel the temporary setting at any time, press
CANCEL (or SCHED). The program schedule will
resume.
MORE
Temporary Hold
Hold Until
Inside
MCR31556
Overriding schedules permanently
1 Press HOLD to permanently adjust the
temperature. This will turn off the program
schedule.
2 Whatever temperature you set will be
maintained 24 hours a day until you manually
change it or press
CANCEL (or SCHED) to cancel
“Hold” and resume the program schedule.
MORE
Permanent Hold
Inside
MCR31557