Setpoint indicator
Appears when the setpoint temperature is displayed.
Current day/time
Current program period
Wake/Leave/Return/Sleep
System status
Cool on: Cooling system is on.
Heat on: Heating system is on.
When Cool On is flashing, compressor protection is engaged
Low battery warning
Temperature
The ambient (measured) temperature is normally displayed. To view the setpoint temperature, press the Up or
Down button once. The setpoint temperature will appear for five seconds.
Set the time and day
1. Press the SET button, then press or to set the clock time.
2. Press the SET button, then press or to select the day of theweek.
3. Press RUN to save & exit.
To Next Page
Loading...
