Honeywell ScanPal EDA51 Series Quick Start Guide

16
Sync Data
To move files between your EDA51 and a computer:
1. Connect the EDA51 to your computer using a USB charge/
communication accessory.
2. On the EDA51, swipe down from the top of the screen to see
the notifications panel.
3. Touch the Android System USB charging notification twice
to open the options menu.
4. Select either Transfer files or Transfer photos (PTP).
5. Open the file browser on your computer.
6. Browse to the EDA51. You can now copy, delete, and move
files or folders between your computer and EDA51 as you
would with any other storage drive (e.g., cut and paste or
drag and drop).
Note: When Provisioning mode is turned off, some folders are hidden
from view in the file browser.

Honeywell ScanPal EDA51 Series Specifications

General

Display Size	5.0 inches
Operating Temperature	-10°C to 50°C (14°F to 122°F)
Drop Specification	1.2 m (4 ft) to concrete
IP Rating	IP64
Processor	Qualcomm Snapdragon 450, 1.8 GHz octa-core
Camera	13 MP rear
Battery	4000 mAh
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2
Scanner	1D/2D barcode scanner
Storage Temperature	-20°C to +70°C (-4°F to +158°F)
GPS	Yes
Display Resolution	1280 x 720
Storage	16 GB