Honeywell ScanPal EDA51 Series Quick Start Guide

17
Restart the Mobile Computer
You may need to restart the mobile computer to correct
conditions where an application stops responding to the system
or the computer seems to be locked up.
1. Press and hold the Power button until the options menu
appears.
2. Select Restart.
To restart the computer if the touch panel display is
unresponsive:
• Press and hold the Power button for approximately 8 seconds
until the computer restarts.
Note: To learn about advanced reset options, see the User Guide.
Support
To search our knowledge base for a solution or log into the
Technical Support Portal and report a problem, go to
www.hsmcontactsupport.com.
Documentation
Product documentation is available at www.honeywellaidc.com.

Honeywell ScanPal EDA51 Series Specifications

General

Display Size	5.0 inches
Operating Temperature	-10°C to 50°C (14°F to 122°F)
Drop Specification	1.2 m (4 ft) to concrete
IP Rating	IP64
Processor	Qualcomm Snapdragon 450, 1.8 GHz octa-core
Camera	13 MP rear
Battery	4000 mAh
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2
Scanner	1D/2D barcode scanner
Storage Temperature	-20°C to +70°C (-4°F to +158°F)
GPS	Yes
Display Resolution	1280 x 720
Storage	16 GB