Honeywell ST 3000 - Pressure and Temperature Specifications; Exhibit A: Additions to Table 4; Exhibit B: Additions to Table 5

34-ST-03-64
Page 3
Description of Diaphragm Seals
Figure 6 - Seals with Threaded Process
Connections can be used with differential, gauge and
absolute pressure transmitters and are available with
½”, ¾” and 1” NPT Female process connections.
Figure 6
Figure 7 - Sanitary Seals can be used with
differential, gauge and absolute pressure transmitters
and are available with 3” and 4” Tri-Clover-Tri-Clamp
process connections.
Figure 7
Figure 8 - Saddle Seals can be used with differential,
gauge and absolute pressure transmitters and are
available with 3” and 4” (6 bolt or 8 bolt designs)
process connections.
Figure 8
Figure 9 - Calibration Rings are available with Flush
Flange Seals and Pancake Seals. Flushing ports (1/4”
or ½”) are available with calibration rings.
Figure 9
Figure 10 - Stainless Steel Armor and PVC Coated
Stainless Steel Armor Capillaries are available with
Honeywell Remote Seal Solutions.
Figure 10
Figure 11 - 2” Stainless Steel Nipples are available
for Close-Coupled remote seal solutions.
Figure 11