Honeywell ST9100C User Manual

6
PROGRAMMING YOUR ST9100C
The Built-in Programmes
The built-in programmes give you a starting point that you can personalise to your own
requirements. Your Installer should have selected one and ticked the box alongside it. If there
is no tick, the product normally leaves the factory with Profile A installed, but it is a simple
matter to select one of the other profiles (see Changing the Installer Parameters, page 12).
Built-in Programme (Profile A)
ON 1 OFF 1 ON 2 OFF 2 ON 3 OFF 3
Monday to Friday
6:30am 8:30am 12:00pm 1:00pm 4:30pm 10:30pm
Saturday & Sunday
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
ON 1 OFF 1 ON 2 OFF 2 ON 3 OFF 3
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Your Personal Programme
The table below has been left blank for you to record your own personal programme.
Built-in Programme (Profile b)
ON 1 OFF 1 ON 2 OFF 2 ON 3 OFF 3
Monday to Friday
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Saturday & Sunday
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Built-in Programme (Profile C)
ON 1 OFF 1 ON 2 OFF 2 ON 3 OFF 3
Monday to Friday
6:30am 7:30am 12:00pm 12:00pm 5:00pm 10:00pm
Saturday & Sunday
8:30am 9:30am 12:00pm 1:00pm 5:30pm 10:30pm

Honeywell ST9100C Specifications

General

Model	ST9100C
Category	Programmer
Display	LCD
Programs	7-day programming
Backup	Battery backup
Mounting	Wall-mounted
Power Supply	230V AC
Switching Current	3A