Honeywell Stanley ST9400C - Programming Your ST900 C; Built-in Programme Options; Recording Your Personal Programme

PROGRAMMING YOUR ST900C
The Built-in Programmes
The built-in programmes give you a starting point that you can personalise to your own
requirements. Your Installer should have selected one and ticked the box alongside it. If there
is no tick, the product normally leaves the factory with Profile A installed, but it is a simple
matter to select one of the other profiles (see Changing the Installer Parameters, page 12).
Built-in Programme (Profile A)
ON 1 OFF 1 ON 2 OFF 2 ON OFF
Monday to
Friday
Heating
6:30am 8:30am 12:00pm 1:00pm 4:30pm 10:30pm
Cooker
6:30am 8:30am 12:00pm 1:00pm 4:30pm 10:30pm
Saturday &
Sunday
Heating
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Cooker
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Built-in Programme (Profile b)
ON 1 OFF 1 ON 2 OFF 2 ON OFF
Monday to
Friday
Heating
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Cooker
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Saturday &
Sunday
Heating
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Cooker
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Built-in Programme (Profile C)
ON 1 OFF 1 ON 2 OFF 2 ON OFF
Monday to
Friday
Heating
6:30am 7:30am 12:00pm 12:00pm 5:00pm 10:00pm
Cooker
6:30am 7:30am 12:00pm 12:00pm 5:00pm 10:00pm
Saturday &
Sunday
Heating
8:30am 9:30am 12:00pm 1:00pm 5:30pm 10:30pm
Cooker
8:30am 9:30am 12:00pm 1:00pm 5:30pm 10:30pm
ON 1 OFF 1 ON 2 OFF 2 ON OFF
Monday Heating
Cooker
Tuesday Heating
Cooker
Wednesday Heating
Cooker
Thursday Heating
Cooker
Friday Heating
Cooker
Saturday Heating
Cooker
Sunday Heating
Cooker
Your Personal Programme
The table below has been left blank for you to record your own personal programme.