Honeywell T6 Pro Z-Wave Professional Install Guide

13
See table below with default 5+2 schedule (MonFri; SatSun), adjustable settings:
Thermostat schedule is turned ON, thermostat included in ZWave network
Period Start Time Heat (MonFri) Cool (MonFri) Heat (SatSun) Cool (SatSun)
Away N/A*
62
°
85
°
62
°
85
°
Home
6:00 Am
70
°
78
°
70
°
78
°
Sleep
10:00 Pm
62
°
85
°
62
°
85
°
*Triggered by ZWave controller
Back
Sched.
On/Off
Back Select
Back Select
Sched.
On/Off
AM
Menu Fa nMode
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule
• If the Schedule menu on the thermostat does not appear, make sure that
thermostat schedule is enabled. This setting is accessed from INSTALLER
SETUP – ADVANCED MENU (see pages 14, 15), ISU 120 - Schedule
type. Here you can also choose from pre-defined different thermostat program
schedule types to be adjustable in the thermostat MENU/SCHEDULE.
Program schedule on the thermostat when not included in ZWave network (not
operated by ZWave controller):
The Honeywell T6 Pro ZWave thermostat will function as fully programmable
thermostat when not operated by your controller. Each day can be programmed
for different heating and cooling setpoints in 4 unique periods (Wake, Away, Home,
Sleep) in the thermostat MENU/SCHEDULE. Make sure that thermostat schedule
is enabled in INSTALLER SETUP – ADVANCED (see pages 14, 15), ISU 120 -
Schedule type.
See table below with default 5+2 schedule (MonFri; SatSun), adjustable settings:
Thermostat schedule is turned ON, thermostat excluded from ZWave network
Period Start Time Heat (MonFri) Cool (MonFri) Heat (SatSun) Cool (SatSun)
Wake
6:00 am
70
°
78
°
70
°
78
°
Away
8:00 am
62
°
85
°
62
°
85
°
Home
6:00 Pm
70
°
78
°
70
°
78
°
Sleep
10:00 Pm
62
°
85
°
62
°
85
°
Back
Sched.
On/Off
Back Select
Back Select
Sched.
On/Off
AM
Menu FanMode
Fan
Auto
Mode
Heat
Wake AwayHomeSleep
Following Schedule
• Wake, Away, Home, Sleep periods appear on the thermostat home screen.
• Temperature setpoints for all four periods, different per day or group of days are
adjustable in thermostat MENU/ SCHEDULE.

Honeywell T6 Pro Z-Wave Specifications

General

Model	T6 Pro Z-Wave
Connectivity	Z-Wave
Display	Backlit LCD
Power Source	24 VAC
Compatibility	Z-Wave certified, works with most Z-Wave hubs
Temperature Control	± 1°F
Thermostat Type	Programmable
Programmability	7-day
Stages	Up to 2 Heat/2 Cool
Operating Temperature	32°F to 120°F (0°C to 48.9°C)
Humidity Range	5% to 90% RH, non-condensing