Honeywell T6360 User Manual

HEATING CONTROLS
APPLICATION
The T6360 is a mains voltage Room Thermostat designed to give
automatic temperature control of domestic wet central heating
systems. It can be used to directly switch a circulating pump or
boiler, or to operate spring return and motor open/motor close
zone valves. The T6360 can switch electrical heating loads up
to 10A.
The T6360 thermostat can also be used for cooling applications.
4.7
T6360
ROOM THERMOSTAT
FEATURES
■
Dual diaphragm temperature
sensing element
■
Suitable for surface or switch
box mounting
■
Heat anticipator for close
temperature control
■
10 to 30˚C setpoint range
■
Change-over contact switching
(cooling loads)
■
Double insulated
OPTIONS
■
Temperature setback model
■
Tamper resistant model
■
Model with indicator lamp
■
Setting dial marked 1 to 5
■
High current rated model
■
Range stops
© Honeywell Control Products and Systems, Issue 10
0014_Section 4_dft10_v4.qxd:Section 2_dft9 15/10/07 16:19 Page 15

Honeywell T6360 Specifications

General

Brand	Honeywell
Model	T6360
Category	Thermostat
Language	English

Summary

Room Thermostat T6360

Features

Key features include dual diaphragm temperature sensing, suitability for surface/box mounting, heat anticipator, 10-30°C setpoint range, change-over contact switching, and double insulation.

Options

Available options include temperature setback models, tamper-resistant models, models with indicator lamps, and models with setting dials marked 1 to 5.

Application

The T6360 is a mains voltage thermostat for automatic temperature control of domestic wet central heating systems, suitable for pumps, zone valves, and heating loads up to 10A, also for cooling.

Installation

Specification

Ordering Specification

Dimensions

Wiring