4 69-0862—4
ature and your furnace response time, to
give the furnace a head start to heat the
house before you arrive home.
SLEEP is the time period you can set for an
energy-saving temperature while you are
sleeping. (For more comfortable sleeping,
some people choose not to raise the cool
temperature during the night.)
You will set one schedule for weekdays and
another for weekends because your
requirements will probably be different for each.
Fill in the times and temperatures you desire for
weekdays and weekends. If you decide not to
program the thermostat, it automatically
controls heating at 68°F (20°C) and cooling at
78°F (20°C), 24 hours a day. Also, you do not
need to enter a time and temperature program
for all periods if your schedule does not require
it. For example, a house that is occupied during
weekdays would only require programs for
WAKE and SLEEP.
When pressing the keys, use the ball of your
finger or a soft pencil eraser.
NOTE: Use of sharp fingernails or pencil
points can damage the keypad.
If you make an error at any time during
programming, just press the Run Program key,
and continue again at the last step.
To Next Page
Loading...
Need help?
General
