Honeywell T8132A - Program Schedule

6
69-0803—1
Program Schedule
Heating Program Schedule
Weekdays Start Time Heating Temperature Cooling Temperature
WAKE __________ ____________________ ____________________
LEAVE __________ ____________________ ____________________
RETURN __________ ____________________ ____________________
SLEEP __________ ____________________ ____________________
Weekends
WAKE __________ ____________________ ____________________
SLEEP __________ ____________________ ____________________
The temperatures cannot be set any higher than 88°F (31°C) or set any lower than
45°F (7°C).
WAKE and RETURN start times should include extra lead time, based on the outside
temperature and furnace response time, to give the furnace a head start to heat the house.
NOTE: If you decide not to program the thermostat, it automatically controls heating at 68°F
(20°C), and cooling at 78°F (26°C), 24 hours a day. This guide can be used for program-
ming your new thermostat.
1
1
2
2
2
2
1