5.2 Select the network.
5.2a Touch the name of the homeowner’s network.
The thermostat displays a password page.
Note: if the home network is not
shown on the list, touch Rescan.
If Rescan still does not display the
home network, signal strength may
be poor at this location and a Wi-Fi
range extender may be required.
5.2b Ask the homeowner to enter the home network
password using the keyboard displayed.
5.2c Touch Done. The thermostat displays
“Connecting to your network. Please wait…”
then shows a “Connection Successful” screen.
Step 5: Connecting to a Wi-Fi network continued
P20
To Next Page
Loading...
