60-Key Keyboard
The 60-key QWERTY keyboard has 101 keyboard functions, including a numeric keyboard pad.
The 60 key keyboard is also available with overlays designed fro use with IBM 3270 and IBM 5250 terminal emulations.
Key Maps
The 60-key keyboard supports all 101 keyboard functions. However, because the keyboard only has 60 keys, all functions are
not visible (or printed on the keyboard).
Please refer to the Key Maps section of the Thor VX8 Reference Guide.
NumLock
The 60-key keyboard does not have a NumLock indicator or key. NumLock can be toggled On or Off using the 2
nd
SHIFT F10
keypress sequence. Changes made to the NumLock status persist across a Windows restart.
CapsLock
The CAPs LED indicates the state of the keyboard CapsLock mode. If CapsLock is enabled this LED is illuminated green.
When CapsLock is off, the LED is dark.
Press 2
nd
then F1 to toggle CapsLock On and Off.
The default value of CapsLock is “Off”.
Secondary Keys
The VMT keyboard is equipped with several secondary keys. These keys are identified by the superscripted text found on the
keyboard keys. The secondary keys are accessible by using two (2) keystrokes: the 2nd key followed by the superscripted
key.
Once the 2
nd
state is enabled (by pressing the 2
nd
key) the Secondary Mode LED is illuminated and the 2
nd
state is enabled
until another key is pressed. The 2
nd
key is toggled on with a 2
nd
keypress and then immediately off with another 2
nd
keypress.
Keyboard Backlight
The keyboard keys are backlit with LEDs. The backlight is manually controlled using the 2
nd
+ CTRL + F10 keypress
sequence.
1-6
To Next Page
Loading...
Need help?
General
