Honeywell Velociti Series - Page 4

C0160-00
FIGURE 9. INTERFACE TWO-WIRE CONVENTIONAL DETECTORS – CLASS A
1. To select Class A, remove the two shunts from the “A/B select” positions.
2. To use a common power supply between multiple MMI-6SF modules, connect a long power supply jumper from T5 or T6 to T5 or T6 on the adjacent
MMI-6SF module.
FIGURE 10. RELAY CONTROL MODULE USED TO DISCONNECT A POWER SUPPLY
C0248-00
4 I56-2742-009
7/1/2022