EasyManua.ls Logo

Honeywell VisionPRO 8000 - Reconnecting Your Wi-Fi Network

Honeywell VisionPRO 8000
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33-00066EFS—01 39
Reconnecting your Wi-Fi network
1 Touch MENU. Select Wi-Fi Setup.
2 Find the name of the network you want to
use by pressing the arrow buttons to scroll
up/down or left/right. Press the Wi-Fi network
name, then press Select.
The thermostat
might display a password page.
3 Enter the password. (See step 1.6 on
page 6 for assistance with entering a
password.) Press Done when complete.
4 The thermostat displays “Connecting Please
Wait” then a “Connection Successful” screen.
5 Touch Done.
If your thermostat is registered, you will
see your signal strength and other status
information. Touch Done.
If the screen displays “Register at
myTCC.com,” go to www.myTCC.com and follow the instructions there, or see
page 8.
M35372
DoaIol Inrol Madorl
Wi-Fi Setup
Installer Options
M35352
M35360

Table of Contents

Other manuals for Honeywell VisionPRO 8000

Related product manuals