2. Adjust the time to when you want the hold to end (the default is the end of the current period) .
The new setting will be maintained until the time shown under Hold Until. When the timer expires,
the schedule will resume, and the temperature will return to the setting for the current time
period.
To cancel the temporary setting at any time, press CANCEL (or SCHED). The program schedule will
resume.
Overriding Schedules Permanently
1. Press HOLD to permanently adjust the temperature. This will turn off the program schedule.
2. Whatever temperature you set will be maintained 24 hours a day until you manually change it or
press CANCEL (or SCHED) to cancel “Hold” and resume the program schedule.
Setting Vacation Hold
Use this function to suspend the program schedule while you are away for an extended period.
1. Press Δ or ∇ to set the temperature.
2. Press Δ or ∇ to set the time of day you want the schedule to resume on the day you return.
3. Press HOLD twice. Hold Until appears.
4. Press s or t to select the number of days.
The selected temperature will be maintained 24 hours a day for the number of days you select. After
the selected number of days has elapsed, the previously programmed schedule will resume at the
time you set.
To Next Page
Loading...
