Note: If your Wi-Fi network does not appear in the list on the Thermostat Wi-Fi Setup page:
• Try performing a network rescan by pressing the Rescan button. This is helpful in areas with a
lot of networks.
• If you are connecting to a hidden network, then enter the network SSID in the textbox, select
the encryption type from the drop down menu, and click on the Add button. This manually adds
the network to the top of the list. Click on the new network in the list and enter the password if
necessary. Click on Connect to join the network.
3. Make sure your thermostat is connected. The message center on your thermostat will now display
CONNECTING… for up to 30 seconds.3a Look at the thermostat display. Verifythat the message
center displays one of the following:CONNECTION SUCCESSFUL
JOINED: [WI-FI NETWORK NAME]
YOU ARE ALMOST DONE
REGISTER AT TOTAL CONNECT If you don’t
see these messages,see page 8.
To register online for remote access to your thermostat continue on page 13.
Note: If you see CONNECTION FAILURE or Wi-Fi SETUP in the message center, confirm you
correctly entered your home network password in step 2. If correct, refer to the FAQ at
wifithermostat.com/support
Registering your thermostat online
To view and set your Wi-Fi thermostat remotely, you must have a Total Connect Comfort account.
Follow the instructions below.
View the Wi-Fi Thermostat Registration video at wifithermostat.com/videos
1. Open the Total Connect Comfort web site.
To Next Page
Loading...
