Honeywell W7761A - Page 46

EXCEL 10 W7761A INPUT/OUTPUT DEVICE
46 74-2699
Table C1. Input/Output Points (Right).
Share (SH), Map (MA), Direct Access (DA)
E-Vision (EV): Calibrate (C), Monitor (M),
Parameter (P), Schematic (S)
Hardware Configuration (HW),
Manual Point (MN), Test (TS)
SH MA DA EV HW MN TS Comments
X X AI1RType specifies which logical sensor is assigned to which physical analog input
sensor channel according to the enumerated list shown in the Eng. Units/States
column.
X X AI2RType: Refer to the description for AI1RType.
X X AI3RType: Refer to the description for AI1RType.
X X AI4RType: Refer to the description for AI1RType.
X X AI5VType specifies which logical voltage or current sensor is assigned to which
physical analog input sensor channel according to the enumerated list that is
shown in the Eng. Units/States column.
X X AI6VType: Refer to the description for AI5VType.
(continued)