Honeywell W7761A - Page 69

EXCEL 10 W7761A INPUT/OUTPUT DEVICE
69 74-2699
Table C4. Configuration Parameters (Left Continued).
Engineering Units:
English (Metric) or
Digital
State
or
Value
of
User Address NvName Field Name States plus Range State Default
DO6PWMPeriod nciPWMConfig2 DO5.si_period_pwm seconds 0.0 to 3000 25.6
DO6PWMZero nciPWMConfig2 DO5.si_pnct_time seconds 0.0 to 3000 0.1
DO6PWMFull nciPWMConfig2 DO5.si_delta_time seconds 0.0 to 3000 25.6
DO7PWMPeriod nciPWMConfig2 DO6.si_period_pwm seconds 0.0 to 3000 25.6
DO7PWMZero nciPWMConfig2 DO6.si_pnct_time seconds 0.0 to 3000 0.1
DO7PWMFull nciPWMConfig2 DO6.si_delta_time seconds 0.0 to 3000 25.5
DO8PWMPeriod nciPWMConfig2 DO7.si_period_pwm seconds 0.0 to 3000 25.6
DO8PWMZero nciPWMConfig2 DO7.si_pnct_time seconds 0.0 to 3000 0.1
DO8PWMFull nciPWMConfig2 DO7.si_delta_time seconds 0.0 to 3000 25.5
Table C4. Configuration Parameters (Right Continued).
Share (SH), Map (MA), Direct Access (DA)
E-Vision (EV): Calibrate (C), Monitor (M),
Parameter (P), Schematic (S)
Hardware Configuration (HW),
Manual Point (MN), Test (TS)
SH MA DA EV HW MN TS Comments
X M X DO6PWMPeriod: Refer to the description for DO1PWMPeriod.
X M X DO6PWMZero: Refer to the description for DO1PWMPeriod.
X M X DO6PWMFull: Refer to the description for DO1PWMPeriod.
X M X DO7PWMPeriod: Refer to the description for DO1PWMPeriod.
X M X DO7PWMZero: Refer to the description for DO1PWMPeriod.
X M X DO7PWMFull: Refer to the description for DO1PWMPeriod.
X M X DO8PWMPeriod: Refer to the description for DO1PWMPeriod.
X M X DO8PWMZero: Refer to the description for DO1PWMPeriod.
X M X DO8PWMFull: Refer to the description for DO1PWMPeriod.