Honeywell XENON 1900 Quick Start Guide

17
Disclaimer
Honeywell International Inc. (“HII”) reserves the
right to make changes in specifications and other
information contained in this document without prior
notice, and the reader should in all cases consult
Honeywell to determine whether any such changes
have been made. The information in this
publication does not represent a commitment on the
part of HII.
HII shall not be liable for technical or editorial errors
or omissions contained herein; nor for incidental or
consequential damages resulting from the
furnishing, performance, or use of this material.
This document contains proprietary information that
is protected by copyright. All rights are reserved.
No part of this document may be photocopied,
reproduced, or translated into another language
without the prior written consent of HII.
©2010 Honeywell International Inc. All rights
reserved.
Other product names or marks mentioned in this
document may be trademarks or registered
trademarks of other companies and are the
property of their respective owners.
Web Address: www.honeywellaidc.com.

Honeywell XENON 1900 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Linear (1D) barcodes supported	-
Standard interfaces	USB, Keyboard wedge, RS-232, RS-485
Connectivity technology	Wired
Input voltage	4 - 5.5 V
Power consumption	450 mA
Power source type	DC
Power consumption (standby)	0.45 W
Power consumption (typical)	2.3 W
Shockproof	Yes
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS

Weight and Dimensions

Depth	104 mm
Width	71 mm
Height	160 mm
Weight	147 g