Honeywell XENON 1900 Quick Start Guide

5
RS485 Interface
The RS485 interface defaults to port 5B. If you
have an IBM POS terminal using port 9B, scan the
appropriate code below to program the terminal,
then power cycle the cash register.
Note: For additional RS485 interface selections,
see the User’s Guide for your product at our
website, www.honeywellaidc.com.
IBM Port 9B HHBCR-1
Interface
IBM Port 9B HHBCR-2
Interface

Honeywell XENON 1900 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Linear (1D) barcodes supported	-
Standard interfaces	USB, Keyboard wedge, RS-232, RS-485
Connectivity technology	Wired
Input voltage	4 - 5.5 V
Power consumption	450 mA
Power source type	DC
Power consumption (standby)	0.45 W
Power consumption (typical)	2.3 W
Shockproof	Yes
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS

Weight and Dimensions

Depth	104 mm
Width	71 mm
Height	160 mm
Weight	147 g