Low Beeper (Daytime Mode)
The following bar code programs the scanner for a low volume.
When a bar code is scanned, the scanner emits a low beep.
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the trigger to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Manual Trigger - Normal
(Default)
Presentation Mode
Streaming Presentation™
When in Streaming Presentation mode, the scanner leaves the scan
illumination on all the time and continuously searches for bar codes.
Streaming Presentation Mode
To Next Page
Loading...
