Honeywell Xenon Ultra 1962 Series - Scanner Operating Modes; Trigger Modes; Suffix Settings

10
Trigger
The following barcodes will allow you to use the scanner in
Manual Trigger - Normal Mode (need to press the trigger to
read) or Presentation mode (the scanner is activated when it
“sees” a barcode).
Streaming Presentation™
When in Streaming Presentation mode, the scanner leaves the
scan illumination on all the time and continuously searches for
barcodes.
Suffix
If you want a carriage return after the barcode, scan the Add CR
Suffix barcode. To add a tab after the barcode, scan the Add Tab
Suffix barcode. Otherwise, scan the Remove Suffix barcode to
remove the suffixes.
Manual Trigger - Normal
(Default)
Presentation Mode
Streaming Presentation Mode
Add CR Suffix
Prelim Draft, not for release