Need help?Do you have a question about the Honeywell Xenon Ultra 1962g and is the answer not in the manual?
General| Type | Handheld Barcode Scanner |
|---|---|
| Scanning Technology | 2D Area Imaging |
| Connectivity | Bluetooth |
| Scan Angle | Pitch: ±65° |
| Decode Capabilities | 1D, 2D, Postal, GS1 DataBar, Composite, OCR |
| Supported Symbologies | PDF417 |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 5% to 95% (non-condensing) |
| Ingress Protection Rating | IP42 |
| Power Source | Battery |
| Compliance | CE |
Instructions for connecting the scanner via USB cable for data transfer and charging.
Procedure to pair the scanner wirelessly with its base for automatic data transmission.
Reset the scanner to its factory default settings using a specific barcode.
Program the scanner to operate as a USB PC keyboard for direct data entry.
Configure scanner operation between manual trigger press and automatic presentation scanning.
Configure the device to communicate with Epic software applications in healthcare environments.
Set up the scanner to communicate with Meditech healthcare software applications.
Configure scanner and base for silent operation, with options for flashing LEDs or long LED illumination.
To Next Page