Need help?Do you have a question about the Honeywell Xenon XP 1950g and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Sensor type | - |
| Scanner type | 1D/2D |
| Pitch reading angle | -45 - 45 ° |
| Light levels (direct sunlight) | 0 - 100000 lx |
| Linear (1D) barcodes supported | Code 128, Code 39, U.P.C. |
| Optical sensor resolution (W x H) | 1280 x 800 pixels |
| 2D (matrix & stacked) barcodes supported | Data Matrix, PDF417, QR Code |
| Input voltage | 4.4 – 5.5 V |
| Power source type | DC |
| Connectivity technology | Wired |
| Product color | Black |
| LED indicators | Yes |
| Built-in display | No |
| Protection features | Bump resistant |
| International Protection (IP) code | IP41 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 99 mm |
|---|---|
| Width | 64 mm |
| Height | 165 mm |
| Weight | 160 g |
Provides installation and programming instructions for Xenon XP scanners.
Steps for safely opening the shipping carton and verifying contents.
Instructions for connecting scanners and bases to computers via various interfaces.
Procedure to create and save custom scanner settings as new defaults.
Steps to restore scanner settings to previously saved custom defaults.
Instant scanner setup for commonly used interfaces via Plug and Play barcodes.
Steps for connecting the scanner via a keyboard wedge interface to a PC.
Guide for connecting the scanner to a computer using an RS232 serial port.
Instructions for connecting the scanner for USB PC or Macintosh keyboard emulation.
Sets the data transmission rate from the scanner to the terminal.
Sets word length, stop bits, and parity for RS232 data transmission.
Manages data transmission control using software commands from the host device.
Steps to establish a wireless link between the scanner and its charge base.
Procedure for establishing a wireless link between the scanner and an Access Point.
Details on the integrated rechargeable battery and its usage.
Provides feedback on the scanner's charge status when out of the base.
Customizable alerts for battery-free scanners when charge level is low.
Specifies how the scanner is charged via the base's power supply.
Configures scanner operation in single, multiple, or Bluetooth device modes.
Manages alarms for when the scanner is out of the base's range.
Adjusts scanner power output to optimize network performance and reduce interference.
Stores barcode data when out of range or during inventory operations.
Connects the scanner to other Bluetooth devices like PCs, laptops, and PDAs.
Pairs the scanner with devices to send scanned data as keyboard input.
Validates incoming barcode data and provides acknowledgment to the scanner.
Configures beeper and LED feedback for good reads and errors.
Sets scanner activation methods including manual trigger and toggle modes.
Uses ambient light and scanner illumination to detect barcodes automatically.
Activates scanning when the scanner is removed from its stand.
Improves reading of damaged or badly printed linear and PDF barcodes.
Sets priority for specific barcode symbologies when multiple types are present.
Enables or disables all supported barcode symbologies for optimal scanner performance.
Configures Codabar symbology settings including start/stop characters and check digits.
Settings for Code 39 symbology, including start/stop characters and check digits.
Configuration options for the Interleaved 2 of 5 barcode symbology.
Configuration options for the Code 128 barcode symbology, including concatenation.
Settings for the GS1-128 barcode symbology.
Configuration options for the UPC-A barcode symbology, including check digit and addenda.
Configuration options for the EAN/JAN-13 barcode symbology.
Lists and configures various 2D postal codes supported by the scanner.
Explains that imaging commands are single-use and revert to defaults after capture.
Details how to combine multiple imaging modifiers and commands in a sequence.
Captures an image using the hardware trigger or the IMGSNP command.
Transmits the last captured image from memory to the host.
Configures signature capture area size and location relative to a barcode.
Adjusts image width, height, pixel depth, and file format for signature capture.
Outputs current software revision, unit serial number, and product information.
Allows viewing programming code content while executing the function.
Enables or disables scanner apps for decoding and formatting.
Overview of the PC software for scanner configuration and firmware updates.
Restores scanner settings to original factory defaults, disabling all plugins.
Explains notation used for menu and query command descriptions.
Defines the structure and syntax for menu commands.
Details special characters used to query the device's settings.
Activates and deactivates the scanner using serial trigger commands.
Mechanical, electrical, and environmental specifications for corded scanners.
Mechanical, electrical, environmental, and radio specs for cordless scanners.
Mechanical, electrical, radio, and environmental specs for the charge base.
Mechanical, electrical, radio, and environmental specs for the charge base.
Performance data showing scan range for various symbologies and densities.
Pin assignments for keyboard wedge, serial, and USB connectors.
Instructions for cleaning the scanner housing and window safely.
Guidance on checking cables and connectors for damage affecting scanner operation.
Information on replacing the standard interface cable for corded scanners.
Guides for diagnosing common issues with corded scanners.
Troubleshooting steps for cordless scanners, bases, and access points.
Steps to diagnose and resolve issues with the cordless system base.
Steps to diagnose and resolve issues with the cordless scanner.
Provides lists of supported symbologies with AIM and Honeywell identifiers.
Details on linear barcode symbologies, including AIM IDs and Honeywell Hex values.
Details on 2D barcode symbologies, including AIM IDs and Honeywell Hex values.
Maps ASCII characters to keyboard control sequences and hex values.
Provides a reference for lower ASCII characters and their alternate representations.
To Next Page
