Honeywell Xenon XP 1950g - Depth of Field Charts

Xenon XP User Guide 263
GS1-128 Default All GS1-128 Settings GS1DFT 169
*On GS1ENA1 169
Off GS1ENA0 169
GS1-128 Message Length Minimum (1 - 80) *1 GS1MIN## 169
Maximum (0 - 80) *80 GS1MAX## 169
Telepen Default All Telepen
Settings
TELDFT 170
*Off TELENA0 170
On TELENA1 170
Telepen Output *AIM Telepen Output TELOLD0 170
Original Telepen Output TELOLD1 170
Telepen Message Length Minimum (1 - 60) *1 TELMIN## 170
Maximum (1 - 60) *60 TELMAX## 170
UPC-A Default All
UPC-A Settings
UPADFT 171
Off UPBENA0 171
*On UPBENA1 171
UPC-A Check Digit Off UPACKX0 171
*On UPACKX1 171
UPC-A Number System Off UPANSX0 172
*On UPANSX1 172
UPC-A 2 Digit Addenda *Off UPAAD20 172
On UPAAD21 172
UPC-A 5 Digit Addenda *Off UPAAD50 172
On UPAAD51 172
UPC-A Addenda Required *Not Required UPAARQ0 172
Required UPAARQ1 172
Addenda Timeout Range (0 - 500) *120 DLYADD##### 173
UPC-A Addenda
Separator
Off UPAADS0 173
*On UPAADS1 173
UPC-A/EAN-13 with Extended
Coupon Code
*Off CPNENA0 173
Allow Concatenation CPNENA1 173
Require Concatenation CPNENA2 173
Addenda Timeout Range (0 - 500) *120 DLYADD##### 174
Coupon GS1 DataBar Output *GS1 Output Off CPNGS10 174
GS1 Output On CPNGS11 174
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page