Honeywell Xenon XP 1950g - Imaging Commands for Xenon XP; Single-Use Basis for Imaging; Command Syntax for Imaging

Xenon XP User Guide 197
If GS1 Code Expansion Off is scanned, retail code expansion is disabled, and UPC-
E expansion is controlled by the UPC-E0 Expand (page 175) setting. If the AIM ID
is enabled, the value will be the GS1-128 AIM ID, ]C1 (see Symbology Charts on
page 297).
If EAN8 to EAN13 Conversion is scanned, all EAN8 barcodes are converted to
EAN13 format.
Default = GS1 Emulation Off.
TCIF Linked Code 39 (TLC39)
This code is a composite code since it has a Code 39 linear component and a
MicroPDF417 stacked code component. All barcode readers are capable of reading
the Code 39 linear component. The MicroPDF417 component can only be decoded
if TLC39 On is selected. The linear component may be decoded as Code 39 even if
TLC39 is off. Default = Off.
GS1-128 Emulation
GS1 DataBar Emulation
GS1 Code Expansion Off
EAN8 to EAN13 Conversion
* GS1 Emulation Off
On
* Off