Honeywell Xenon XP 1950g - Standard Connector Pinouts

266 Xenon XP User Guide
MSI Default All MSI Settings MSIDFT 187
*Off MSIENA0 187
On MSIENA1 187
MSI Check Character *Validate Type 10, but Don’t
Transmit
MSICHK0 188
Validate Type 10 and
Transmit
MSICHK1 188
Validate 2 Type 10 Chars, but
Don’t Transmit
MSICHK2 188
Validate 2 Type 10 Chars and
Transmit
MSICHK3 188
Validate Type 11 then Type 10
Char, but Don’t Transmit
MSICHK4 188
Validate Type 11 then Type 10
Char and Transmit
MSICHK5 188
Disable MSI Check Characters MSICHK6 188
MSI Message Length Minimum (4 - 48) *4 MSIMIN## 189
Maximum (4 - 48) *48 MSIMAX## 189
GS1 DataBar Omnidirectional Default All
GS1 DataBar Omnidirectional
Settings
RSSDFT 189
Off RSSENA0 189
*On RSSENA1 189
GS1 DataBar Limited Default All GS1 DataBar Limited
Settings
RSLDFT 190
Off RSLENA0 190
*On RSLENA1 190
GS1 DataBar Expanded Default All GS1 DataBar
Expanded Settings
RSEDFT 190
Off RSEENA0 190
*On RSEENA1 190
GS1 DataBar Expanded Msg.
Length
Minimum (4 - 74) *4 RSEMIN## 190
Maximum (4 - 74) *74 RSEMAX## 190
Trioptic Code *Off TRIENA0 191
On TRIENA1 191
Codablock A Default All Codablock A Settings CBADFT 191
*Off CBAENA0 191
On CBAENA1 191
Codablock A Msg. Length Minimum (1 - 600) *1 CBAMIN### 192
Maximum (1 - 600) *600 CBAMAX### 192
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page