7
Reading Techniques
The view finder projects an aiming beam that
should be centered over the barcode, but it
can be positioned in any direction for a good
read.
Standard Product Defaults
The following barcode resets all standard
product default settings.
USB Serial
Scan the following code to program the scanner to emulate a
regular RS232-based COM Port. If you are using a Microsoft®
Windows® PC, you will need to download a driver from the Hon-
eywell website (sps.honeywell.com). The driver will use the next
available COM Port number. Apple® Macintosh computers rec-
ognize the scanner as a USB CDC class device and automati-
cally use a class driver.
Note: No extra configuration (e.g., baud rate) is necessary.
Standard Product Defaults
USB Serial
Prelim Draft, not for release
To Next Page
Loading...
