15
Very Low Beeper (Nighttime Mode)
The following barcode silences the base, and sets the scanner
for a very low beep when reading barcodes. After scanning this
code, the base beep, base and scanner power up beep, and
scanner linking sounds are all silenced. When a barcode is
scanned, the scanner emits a very soft beep.
Low Beeper (Daytime Mode)
Scan the following barcode to set all sounds to on, but at a low
volume. The scanner beep, base beep, base and scanner power
up beep, and scanner linking sounds are all set to low volume.
Nighttime Mode
Daytime Mode
Prelim Draft, not for release
To Next Page
Loading...
