honor 3 Pro - Basic Operations; Noise Control; Download and Install App

Basic operations
Noise control
Switch noise control modes
After the earbuds are connected to the phone/tablet, you can reduce noise in any of the
following ways:
Method 1: Press and hold the left/right earbuds to turn on or o the Noise canceling or
Awareness function and switch the noise control modes according to voice prompts.
Method 2: Open the HONOR AI Space app, go to the details page of the earbuds, select
Noise control, and enable or disable Noise canceling or Awareness.
Method 3: Turn on your phone/tablet (Magic UI 6.0 and above), go to Settings > Bluetooth >
PAIRED DEVICES, tap the button to the right of the earbuds name, select Noise control,
and enable or disable the Noise canceling or Awareness function.
• We recommend using properly sized ear tips and adjusting the wearing position, along with an
ear tip t test to ensure that the ear tips t well in the ear canal for better sound quality and
superior noise canceling.
• Noise reduction works even if you only wear one earbud, but since the other ear is exposed to
the environment, the noise canceling eect is limited. We recommend using both earbuds for
better noise canceling.
•
When you start wearing one earbud, the o mode will be used by default. If you switch the
mode to the "Noise canceling" or "Awareness" while wearing one earbud, the operation will not
be saved and the last mode will be used when you wear two earbuds again.
Download and install app
Download the HONOR AI Space app
Download and install the HONOR AI space app by scanning the QR code to access more
features and custom settings for a better listening experience.
8