123
Battery Backup
TripMate HT-TM05 has an internal 10,400mAh battery, so you can use it
charge your devices on the go.
Charge TripMate
Start charging the TripMate when the remaining power is below 25%.
This will ensure your external charger is ready for emergency situations.
To charge the unit:
1. Connect the USB end of the USB cable to an AC adapter or any USB
power source;
2. Connect the micro-USB end of the cable to the charging port of the
TripMate;
3. The power indicators will blink during the charging sequence. Once
the unit is fully charged, the blinking will stop and the indicators will
remain lit until the cable is.
We recommend using a USB AC adapter with up to 1.6 A output to
charge the TripMate. Using a charger with an output higher than 1.6 A
will damage the internal battery.
To Next Page
Loading...
Need help?
General
