47
Tips
When connecting devices with network cables, please make sure the
cable is connected securely. Loose cables are one of the most common
sources of network setup problems.
If a wired network type cannot be chosen, an alternative method is
available to set up the router mode
1. Connect the computer directly to the wired connection with an
Ethernet cable
2. Press win+R on the keyboard (the "win" key is located between the
Ctrl and Alt buttons)
3. Enter CMD, a black window pops up; enter ipconfig. Get the IP
address, subnet mask and default gateway assigned by the
router/modem.
To Next Page
Loading...
Need help?
General
