3
Features:
1
8
10
11
2
3
4
5
6
7
13
14
9
12
1 Power: Turns the unit ON and OFF.
2 Air Quality Display: Indicates current air quality and pollution
levels. 3-step light clearly shows air quality level. Green – good;
Yellow – fair; Red – bad. Measures and controls the indoor air
quality. Includes numerical output value.
3 Timer: Sets the run time before automatically turning off. Set at
1,2,4,6,8 hrs
4 Fan Speed: The lights indicate the current fan speed.
5 Ioniser: Generates negative ions to attract particles, such
as dust, bacteria, pollen and many other allergens, which are
positively charged. Once bonded, the particles become heavy
and falls to the ground and out of your respiratory system.
6 Filter replacement light: The lter indicator light will turn on
when it is time for the lter to be replaced.
7 Remote control: Wirelessly operates the unit.
8 Carry Handle: Please use the carry handles to transport the
product.
9 Main filter: 1 lter that consists of a pre-lter, activated carbon
lter and HEPA lter.
10 Air inlet: Where air enters the unit.
11 Air outlet: Where clean air is released.
12 Filter cover: Easily removable to gain access to the lter.
13 PM sensors: For detection of particulate concentration in the air.
14 Remote control receiver: Sensor for detecting commands
selected on remote control.
Hoover_AirmagMini_250516_manual_P160075_GB_TC_HK ver.indb 6 26/05/2016 4:51 PM
To Next Page
Loading...
