EN - 20
7 BEFORE CALLING AFTER-SALES SERVICE
Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at improper
levels or if a problem occurs with the appliance. In case of a problem within the fridge, the
alarm led will release red light.
Alarm
indicator LED
is turning on
MEANING WHY WHAT TO DO
"Failure" Warning
part(s) out of order or
there is a failure in the
cooling process.
The product is plugged
a long-time power
interruption for 1 hour.
Check the door is open or not and check
if the product working 1 hour. If the door
is not open and the product had worked
1 hour, call service for assistance as
soon as possible.
If you are experiencing a problem with your
refrigerator, please check the following
before contacting the after-sales service.
Your refrigerator does not operate
Check if:
Your fridge is plugged in and switched on
The fuse has blown
Is the temperature adjustment right?
The socket is faulty. To check this, plug
another working appliance into the same
socket.
Your refrigerator is performing poorly
Check if:
The appliance is overloaded
The doors are closed properly
There is any dust on the condenser
There is an adequate distance between
the appliance and surrounding walls
Your refrigerator is operating noisily
The following noises can be heard during
normal operation of the appliance.
Cracking (ice cracking) noise occurs:
During automatic defrosting.
When the appliance is cooled
or warmed (due to expansion of
appliance material).
Clicking noise occurs: When the
off.
Motor noise: Indicates the compressor
is operating normally. The compressor
may cause more noise for a short time
Bubbling noise and splashing
occurs:
refrigerant in the tubes of the system.
Due
container. This noise is normal during
defrosting.
Air blowing noise occurs: During
normal operation of the system due to
the circulation of air.
There is a build-up of humidity inside
the fridge
Check if:
All food is packed properly. Containers
must be dry before being placed in the
fridge.
The fridge doors are opened frequently.
Humidity of the room will enter the
fridge each time the doors are opened.
Humidity increases faster if the doors
are opened frequently, especially if the
humidity of the room is high.
There is a build-up of water droplets
on the rear wall. This is normal after
automatic defrosting (in Static Models).
To Next Page
Loading...
