Hoover CH34006 User Manual

1110
GETTING STARTED
Assembling Wand & Attaching The Tools Harness Ergonomics & Height Adjustment
CAUTION NOT TO BE USED FOR GROOMING A PET.
NOTE: The Harness has been designed and engineered to accommodate a wide range of users
and can be adjusted to fit, according to height. The Upper Harness should sit between the shoulder
blades for a comfortable fit. The backpack is shipped with the Upper Harness positioned with the
center hole mounted to the middle Height Adjustment Boss.
For taller users, move the Upper
Harness up to the lower Height
Adjustment Boss.
1
To adjust the Upper Harness,
use a Phillips screwdriver to
remove the screw from the
Height Adjustment Boss.
2
Move the Upper Harness and fully
tighten screw into the correct
Height Adjustment Boss.
For shorter users, move to the top
Height Adjustment Boss.
1
Assemble the wand by
first unscrewing the
cuff from the end of
the upper wand and
sliding onto the lower
wand.
4
Firmly push hose end
over the open end of
the upper wand.
2
Align the groove of
lower wand with upper
wand and push firmly
to slide wand into
position at desired
length.
5
To use floor tools,
insert floor tool into
cuffed end of lower
wand and align metal
ring with groove in
tool. Tighten cuff by
twisting clockwise.
3
Tighten outer cuff by
twisting clockwise.

Hoover CH34006 Specifications

General

Brand	Hoover
Model	CH34006
Category	Vacuum Cleaner
Language	English