1. Edge Cleaning: Brushed edge cleaning is provided on the right side
of the cleaner. Standard edge cleaning is provided on the left side.
2. Handle Release Pedals: step on either pedal to lower handle to either
operating or low position. (Some models have only one pedal.)
3. Cord Reel: to unwind cord, pull from cord reel to desired length. Hold
plug until cord is rewound. (Available with some models.)
4. Cord Return Button: depress to automatically rewind cord for
storage. (Available with some models.)
5. Vinyl Bag Jacket: covering for throw away bag.
6. Bag Spring: place spring ring over hook to support the bag.
7. ON-OFF Switch: some models have two speeds.
8. Manual Operation Button: depress to disengage Power Drive fea-
ture in tight cleaning areas.
9. ‘Power Drive’ Handle Grip.
10. Air Freshener Dispenser (some models only): designed to hold a
fragrance tablet and release a pleasant scent during cleaning
11. Twin Headlight (Available with some models.)
12. Carpet Height Adjustment Lever: choose “LOW/MEDIUM”,
“PLUSH”, or “SHAG”.
13. Molded Furniture Guard
Note: If using cleaner on new carpet, be sure to change bag frequently.
See “Maintenance” section for bag replacement.
Operate cleaner only at voltage specified on data plate on bottom of
cleaner.
f
Cord wrap model
Wrap cord around hooks for stor-
age.
On some models the top hook can
be rotated forward or backward
for easy cord release. The hook
can then be repositioned for
wrapping the cord.
4
To Next Page
Loading...
Need help?
General
